Description
Woven Fiberglass Mesh Aluminum Foil Tape combines aluminum foil with a woven fiberglass mesh reinforcement, creating a flexible composite tape for insulation wrapping, surface protection, and sealing-related applications. A pressure-sensitive adhesive and release liner are added to support convenient handling and application.
Product Introduction
The tape is manufactured by laminating aluminum foil onto a visibly woven fiberglass mesh substrate. The mesh has a clear warp-and-weft structure that provides reinforcement while maintaining flexibility. A pressure-sensitive adhesive (PSA) is applied to the backing, with kraft paper or yellow paper used as the release liner depending on the product configuration.
Compared with conventional fiberglass cloth aluminum foil tape, the open woven mesh structure provides a different balance between tensile strength and flexibility. The reduced mesh density allows the tape to conform more easily to curved, irregular, or corner surfaces.
The aluminum foil layer also provides a barrier against moisture penetration when combined with the specified laminated structure. For applications where flame resistance is required, the adhesive or related material configuration should be selected according to the actual application requirements.
Key Product Features
Woven Fiberglass Mesh Reinforcement
The fiberglass mesh features a visible woven pattern with defined warp and weft directions. This structure provides reinforcement while keeping the tape more flexible than a denser fiberglass cloth construction.
Flexible and Conformable
The open mesh construction allows the tape to bend and follow irregular geometries more easily. It can be used around corners, curved areas, and other surfaces where rigid materials may be difficult to apply.
Aluminum Foil Barrier Layer
The aluminum foil forms the main outer layer of the composite tape. The specified PE-laminated structure provides resistance to water penetration, supporting moisture-barrier requirements in relevant applications.
Pressure-Sensitive Adhesive
Different versions are available with solvent-based or water-based adhesive systems. The adhesive selection can be matched with the required peel strength, tack, holding power, and application conditions.
Multiple Mesh Patterns
The product is available in 3×3 and 5×5 woven mesh patterns. Different configurations provide options for customers with different flexibility and reinforcement requirements.
Controlled Dimensions
The tape can be supplied in different widths and roll lengths. Manufacturing tolerances are specified for aluminum foil thickness, total thickness, width, and length to support consistent processing.
Technical Specifications
| Total Thickness | Weave Pattern | Adhesive Type | Liner | Size (W/D) | 180° Peel Strength | Initial Tack | Holding Power | Tensile Strength |
|---|---|---|---|---|---|---|---|---|
| 130 μm | 3×3 | Solvent-based | Kraft paper | 120 mm × 100 m | ≥6 N/cm | ≥10# | ≥24 h | ≥40 N/cm |
| 130 μm | 5×5 | Solvent-based | Yellow paper | 50 mm × 50 m | ≥6 N/cm | ≥10# | ≥24 h | ≥40 N/cm |
| 120 μm | 5×5 | Water-based | Yellow paper | 1220 mm × 900 m | ≥4 N/cm | ≥10# | ≥24 h | ≥40 N/cm |
Available Dimensions
The standard product configurations cover different tape widths and roll lengths according to the selected construction.
-
Aluminum foil thickness tolerance: ±0.005 mm
-
Total thickness tolerance: ±0.01 mm
-
Width tolerance: ±0.5 mm
-
Length tolerance: ±0.2 m
-
Woven mesh options: 3×3 and 5×5
-
Adhesive options: solvent-based and water-based
-
Liner options: kraft paper and yellow paper
The final configuration should be selected according to the required tape size, adhesive system, mesh pattern, and intended use.
Application Areas
Thermal Insulation Wrapping
The tape can be used for wrapping and covering insulation materials around pipelines and ducts. Its flexible structure allows the tape to follow curved sections during installation.
Duct and Pipeline Protection
For insulation-related applications, the aluminum foil surface can serve as a protective outer layer while the woven fiberglass mesh provides reinforcement to the tape structure.
Curved and Irregular Surfaces
The flexible mesh construction is suitable for applications involving corners, curved sections, and irregular equipment surfaces where conformability is important.
Outdoor Equipment Protection
The tape can be applied as a protective covering around corners and curved areas of outdoor equipment where a flexible aluminum foil composite tape is required.
Home Appliance Industry
The product can be considered for insulation and protective tape requirements within home appliance manufacturing, subject to the specific material and adhesive configuration required by the application.
Infrastructure Fire Protection
The product is also associated with infrastructure fire-protection applications. Where flame-retardant performance is required, the appropriate flame-retardant adhesive or product configuration should be confirmed before use.
Adhesive Options
Woven Fiberglass Mesh Aluminum Foil Tape is available with different adhesive systems to accommodate different production and application requirements.
The solvent-based versions provide the listed peel strength, tack, holding power, and tensile strength characteristics. A water-based version is also available with a 5×5 mesh construction and a wider 1220 mm × 900 m configuration.
For projects requiring flame-retardant properties, flame-retardant adhesive options are available. The provided shelf-life specification for water-based and flame-retardant adhesives is 6 months, while solvent-based versions have a shelf life of 12 months.
Storage Recommendations
To maintain product quality during storage, keep the tape in a cool and dry indoor environment at room temperature.
Recommended storage conditions:
-
Temperature: -5°C to 40°C
-
Relative humidity: below 80% RH
-
Keep away from direct sunlight
-
Keep away from heat sources
-
Store in a dry environment
Proper storage conditions should be maintained throughout the storage period, particularly for adhesive-coated products.
Shelf Life
The shelf life depends on the adhesive formulation:
-
Water-based and flame-retardant adhesive: 6 months
-
Solvent-based adhesive: 12 months
Customers should check the production date and storage conditions when planning long-term inventory.
Why Choose This Tape for B2B Applications?
For buyers sourcing aluminum foil tape with reinforcement, this product provides several configuration options rather than a single fixed construction. The choice of 3×3 or 5×5 woven mesh, solvent-based or water-based adhesive, and different liner formats allows the tape to be selected according to the requirements of a specific application.
The open mesh structure is particularly useful where flexibility and surface conformity are important. At the same time, the aluminum foil layer provides the composite tape with its barrier and protective characteristics.
The defined dimensional tolerances also provide reference points for procurement and production planning. Aluminum foil thickness, overall thickness, width, and length are controlled within the specified ranges.
Product Selection Considerations
When selecting a woven fiberglass mesh aluminum foil tape, buyers should consider several factors:
-
Mesh pattern: 3×3 and 5×5 configurations are available.
-
Adhesive type: solvent-based and water-based options are offered.
-
Liner: kraft paper or yellow paper may be selected depending on the configuration.
-
Tape dimensions: width and roll length should match the application and processing equipment.
-
Flexibility requirements: the open mesh structure is useful for curved and irregular surfaces.
-
Application environment: temperature, humidity, moisture exposure, and flame-retardant requirements should be considered before choosing the final specification.
-
Storage period: shelf life varies according to the adhesive formulation.
Quality and Dimensional Control
The specified tolerances provide a basis for controlling the consistency of the finished tape:
-
Aluminum foil thickness: ±0.005 mm
-
Total thickness: ±0.01 mm
-
Width: ±0.5 mm
-
Length: ±0.2 m
These parameters can be used by B2B buyers when reviewing product specifications, planning production processes, and comparing different tape configurations.
Suitable for Industrial Sourcing
For distributors, insulation-material suppliers, industrial tape buyers, and manufacturers requiring reinforced aluminum foil tape, the product offers a combination of aluminum foil, woven fiberglass mesh, pressure-sensitive adhesive, and release liner in one composite construction.
Its flexible mesh structure makes it different from conventional aluminum foil tape without reinforcement, while the specified adhesive and liner options allow the product to be configured for different application requirements.
Jiangyin Biaotie Material Factory Co., Ltd provides this woven fiberglass mesh aluminum foil tape in multiple specifications, allowing B2B buyers to select the appropriate mesh, adhesive, liner, width, and roll format for their intended application.
Product Summary
Woven Fiberglass Mesh Aluminum Foil Tape is a reinforced aluminum foil tape with a woven fiberglass mesh backing, PSA coating, and release liner. With 3×3 and 5×5 mesh options, solvent-based or water-based adhesive choices, and controlled dimensional tolerances, it can be used for insulation wrapping, duct and pipeline covering, curved-surface protection, home appliance applications, and specified infrastructure protection requirements.
For detailed specification matching and bulk sourcing, buyers can contact Jiangyin Biaotie Material Factory Co., Ltd to confirm the required mesh pattern, adhesive type, liner, tape dimensions, and application conditions.
Reviews
There are no reviews yet.